The 10 best Industrial & Scientific Industrial Process Filtration you can buy of 2020

4.7 ⭐ ⭐ ⭐ ⭐ ⭐

• Optimal fine sediment depth filtration. Large diameter, dual gradient design provides high flow with low pressure drop
• Nominal filtration rating of 1 micron
• Fits most standard 10-inch Big Blue housings
• Flow rates up to 10 gallons per minute
• Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C)

4.7 ⭐ ⭐ ⭐ ⭐ ⭐

• Optimal fine sediment depth filtration. Large diameter, dual gradient design provides high flow with low pressure drop
• Nominal filtration rating of 1 micron
• Fits most standard 20-inch Big Blue housings
• Flow rates up to 20 gallons per minute
• Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C)

4.7 ⭐ ⭐ ⭐ ⭐ ⭐

• Features a solid block carbon filter which removes impurities from your drinking water without removing its natural healthy minerals and nutrients.
• Great tasting water in seconds: reduces over 200 harmful contaminants – including chlorine, lead, mercury, sediment, heavy metals, VOC’s, herbicides, pesticides, pharmaceutical, industrial waste, & PFOE
• Easy to install in pitcher, does not require pre-soaking
• Fits pitcher models: CWS100AW, CWS100A, CWS100A2, CWS100B, CWS100B2 and Replaces: filter models: CWF1012, CWF1014, CWF1016, CWF1032, CWF1034
• Long lasting: Filters 50 gallons of water, 20% more than most competitive models

4.5 ⭐ ⭐ ⭐ ⭐

•

4.8 ⭐ ⭐ ⭐ ⭐ ⭐

• Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water
• Nominal filtration rating of 5 microns
• Resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength
• Initial pressure drop of less than 1 psi at a flow rate of 20 gpm
• Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)

4.6 ⭐ ⭐ ⭐ ⭐ ⭐

• Reduces sand, silt, scale, and rust particles in residential and municipal drinking water and industrial fluid applications
• Nominal filtration rating of 0.5 micron
• Polypropylene cord precisely wound on a rigid polypropylene core for high dirt-loading capacity
• Initial pressure drop of 5 psi at a flow rate of 10 gpm
• Temperature range of 40 to 165 degrees F (4.4 to 74 degrees C)

4.4 ⭐ ⭐ ⭐ ⭐

•

4.7 ⭐ ⭐ ⭐ ⭐ ⭐

• The Hoshizaki 4HC-H 9655-11 Filter Cartridge is designed to decrease maintenance and keep ice makers functioning at full capacity. This filter can save you money on your ice machine mainteance and up-keep by reducing limescale build-up. Having contaminants in your water not only effects the quality of drinking water, it effects your ice, and having bad-tasting ice can effect the flavor of all your beverages.
• This filter will not only reduces scale, it reduces chlorine, taste, and odor, sediments, and has a bacteriostatic effect that will leave your ice tasting fresh, crisp, and delicious! The 4HC-H replacement filter works with single, double, and triple filtration systems. Replace approximately every 21,000 gallons or 6 to 12 months depending on usage and water condition.
• Features: Great-Tasting Ice. This filter reduces 99.99% of chlorine, taste, and odor, 99% of rust and corrosion, 99% of sediment, and limescale! This will ensure all your ice and beverage taste delicious and are free of particulates.
• Money-Saver. By reducing these contaminants, as well as limescale, you will save money on maintenance and upkeep on your ice machine. If you are running a food & bev business, this filter will ensure all your ice is great-tasting. NSF CertifiedThis filter has been certified by NSF to Standard 42 to reduce particulate, CTO, and for the bacteriostatic effect of the cartridge.
• Note: The Hoshizaki HF, HF-H, HC and HC-H filters have been discontinued, and have been replaced with the 4HC-H Filter. The 4HC-H filter is not recommended for use with flakers. The 4HC-H filter is shorter in length than the previous filters.

4.5 ⭐ ⭐ ⭐ ⭐

• IMPORTANT NOTE: Units DO NOT include the nuts and washers
• Filter Housing Mounting Bracket for Big Blue 10″ and 20″ Filter Housings

4.6 ⭐ ⭐ ⭐ ⭐ ⭐

• Basic chlorine and sediment reduction at a good economic value. Increased sediment reduction with higher capacity
• Nominal filtration rating of 5 micron
• Designed to fit in a standard 5” housing
• Flow rates up to 2 gallons per minute
• Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)